Charge Controller
Victron BlueSolar MPPT 75/15 Charge Controller
Brand:Victron
Check Current Price & Availability →Affiliate disclosure: This link is an affiliate link. SunPowerLogic may earn a commission from qualifying purchases at no additional cost to you.
Product Overview
Victron BlueSolar MPPT 75/15 Charge Controller is a charge controller from Victron tracked in the SunPowerLogic product catalog. Where specifications are listed, this page summarizes controller current rating of 15 A, controller type of MPPT, supported system voltage of 12 V, maximum pv input voltage of 75 V, additional specification note of 12/24V auto; 75V max PV input; 15A charge current; load output.
Charge controllers regulate solar input to protect batteries and match charging profiles. Current rating, supported system voltage, and maximum PV input voltage are the key compatibility checks when pairing with panels and battery banks.
Additional listing note: 12/24V auto; 75V max PV input; 15A charge current; load output.
SunPowerLogic does not replace professional electrical design. Confirm wiring, fusing, and local code requirements for your build.
Editor’s Verdict
Victron BlueSolar MPPT 75/15 lists 15A charge current, 75V max PV input, and 12/24V auto support per intake specifications. It scores 7/10 as an entry Victron MPPT option for modest RV and marine arrays where Bluetooth is not required on the controller itself.
Pros
- 15A MPPT charge current from established Victron Energy line
- 75V max PV input suits common 12V panel wiring
- 12/24V auto recognition listed
Cons
- BlueSolar line lacks built-in Bluetooth versus SmartSolar models
- Lower 15A ceiling than 45A–70A controllers in this intake batch
- Load-output behavior differs from higher-amperage Victron SKUs
Specifications
- Controller current rating
- 15 A
- Controller type
- MPPT
- Supported system voltage
- 12 V
- Maximum PV input voltage
- 75 V
- Additional specification note
- 12/24V auto; 75V max PV input; 15A charge current; load output
Best For
Ideal use cases based on product category, published specifications, and setup references in the SunPowerLogic catalog. These are planning contexts—not guarantees of compatibility for every installation.
- Small RV camper and marine house banks
- Entry Victron MPPT upgrades from PWM
- Modest arrays where 15A charge rate suffices
Not Ideal For
Situations where another product type, capacity tier, or specification may be a better fit.
- Large off-grid arrays needing 40A+ charge current
- Buyers requiring integrated Bluetooth without a dongle
- Systems already standardized on Renogy controller ecosystems
Used in These Setups
No setups yet
Alternatives to Consider
Other catalog products flagged as alternatives during editorial review.
Related Products
Products from the same brand or product type, excluding this listing.
Victron BMV-712 Smart Battery Monitor
View Product →
Victron Orion-Tr 12/12 18A DC-DC Converter
View Product →
Victron Orion-Tr Smart 12/12 30A DC-DC Charger
View Product →
Victron SmartShunt 500A Battery Monitor
View Product →
Victron SmartSolar MPPT 100/50 Charge Controller
View Product →
Victron SmartSolar MPPT 150/45 Charge Controller
View Product →Frequently Asked Questions
Is the Victron BlueSolar MPPT 75/15 Charge Controller suitable for RV use?
RV suitability depends on whether this charge controller matches your voltage architecture, daily energy budget, and charging equipment. Listed controller current rating is 15 A. Compare your load list and recharge plan against the listed specifications rather than the product category alone.
Can it be used off-grid?
Off-grid use is possible when the charge controller is sized for your daily consumption and paired with appropriate charging and protection equipment. Listed controller current rating is 15 A. Whole-property off-grid loads often require system-level planning beyond a single component.
Is it compatible with solar?
Solar compatibility depends on matching panel output, charge equipment limits, and battery chemistry. Listed controller current rating is 15 A. Verify controller current, voltage limits, and connector types before connecting arrays.
Does it require an inverter?
Most charge controller products operate on the DC side of a system. AC appliances typically require a separate inverter sized for peak and surge loads unless another integrated power station handles conversion.
How do I choose the correct size?
Start with daily energy use in watt-hours, identify peak AC demand, and map those figures to the relevant specification for this product type—amp-hours and voltage for batteries, watts for solar and inverters, or controller current for charge equipment. SunPowerLogic setup examples and buying guides show the same planning method using documented assumptions.
What should I verify before buying the Victron Charge Controller?
Confirm merchant listing details, warranty terms, connector types, and installation constraints that are not captured in the catalog. Listed controller current rating is 15 A. Affiliate links, when present, lead to external retailers where current availability and pricing should be confirmed directly.
Product specifications on this page come from published listings tracked in the SunPowerLogic catalog. They are planning references, not professional electrical designs. Verify compatibility with your loads and installation before purchasing.