Accessory
EPEVER WiFi Adapter (EPEVER-WiFi-2.4G-RJ45-D)
Brand:EPEVER
Check Current Price & Availability →Affiliate disclosure: This link is an affiliate link. SunPowerLogic may earn a commission from qualifying purchases at no additional cost to you.
Product Overview
EPEVER WiFi Adapter (EPEVER-WiFi-2.4G-RJ45-D) is a accessory from EPEVER tracked in the SunPowerLogic product catalog. Where specifications are listed, this page summarizes limited published specification data.
Use the specifications below as planning references. Verify compatibility with your loads, charging sources, and installation requirements before purchasing.
Additional listing note: WiFi 2.4G RJ45 adapter for Tracer-AN, Triron-N, Tracer-BN, XTRA-N series controllers; Solar Guardian app; 5V powered from RS485 port; up to 20m offline range per listing; IP30; 63×19×10mm; 7.7g net weight per listing.
SunPowerLogic does not replace professional electrical design. Confirm wiring, fusing, and local code requirements for your build.
Editor’s Verdict
EPEVER WiFi Adapter EPEVER-WiFi-2.4G-RJ45-D lists RJ45 RS485 connectivity, Solar Guardian app support, and 5V port-powered operation per the source listing. It scores 7/10 for remote monitoring of compatible EPEVER controllers when WiFi cloud access is part of the plan.
Pros
- WiFi 2.4G RJ45 adapter for Tracer-AN and XTRA-N controllers per listing
- Powered from controller RS485 port—no external supply listed
- Solar Guardian app support for Android and iOS noted
Cons
- EPEVER-only compatibility with RJ45 communication port
- Online WiFi setup noted as complex in listing bullets
- Does not include charge control hardware
Best For
Ideal use cases based on product category, published specifications, and setup references in the SunPowerLogic catalog. These are planning contexts—not guarantees of compatibility for every installation.
- Remote monitoring of EPEVER MPPT controllers
- RV and off-grid installs adding app access to existing controllers
- Offline local monitoring within ~20m per listing
Not Ideal For
Situations where another product type, capacity tier, or specification may be a better fit.
- Non-EPEVER hardware
- Buyers without 2.4G WiFi during initial setup
- Systems where MT50 wired display is sufficient
Used in These Setups
No setups yet
Alternatives to Consider
Other catalog products flagged as alternatives during editorial review.
Related Products
Products from the same brand or product type, excluding this listing.
EPEVER MT50 Remote Meter
View Product →
EPEVER Tracer1210AN 10A MPPT Charge Controller
View Product →EPEVER Tracer2210AN 20A MPPT Charge Controller (MT50 Kit)
View Product →EPEVER Tracer2210AN G3 20A MPPT Charge Controller
View Product →EPEVER Tracer3210AN G3 30A MPPT Charge Controller (MT52 Kit)
View Product →EPEVER Tracer4210AN G3 40A MPPT Charge Controller (MT52 Kit)
View Product →Frequently Asked Questions
Is the EPEVER WiFi Adapter (EPEVER-WiFi-2.4G-RJ45-D) suitable for RV use?
RV suitability depends on whether this accessory matches your voltage architecture, daily energy budget, and charging equipment. Compare your load list and recharge plan against the listed specifications rather than the product category alone.
Can it be used off-grid?
Off-grid use is possible when the accessory is sized for your daily consumption and paired with appropriate charging and protection equipment. Whole-property off-grid loads often require system-level planning beyond a single component.
Is it compatible with solar?
This accessory may work within a solar-powered system when upstream charging equipment is correctly sized. The product itself does not replace a charge controller or array sizing step.
Does it require an inverter?
Most accessory products operate on the DC side of a system. AC appliances typically require a separate inverter sized for peak and surge loads unless another integrated power station handles conversion.
How do I choose the correct size?
Start with daily energy use in watt-hours, identify peak AC demand, and map those figures to the relevant specification for this product type—amp-hours and voltage for batteries, watts for solar and inverters, or controller current for charge equipment. SunPowerLogic setup examples and buying guides show the same planning method using documented assumptions.
What should I verify before buying the EPEVER Accessory?
Confirm merchant listing details, warranty terms, connector types, and installation constraints that are not captured in the catalog. Affiliate links, when present, lead to external retailers where current availability and pricing should be confirmed directly.
Product specifications on this page come from published listings tracked in the SunPowerLogic catalog. They are planning references, not professional electrical designs. Verify compatibility with your loads and installation before purchasing.