Charge Controller
EPEVER Tracer3210AN G3 30A MPPT Charge Controller (MT52 Kit)
Brand:EPEVER
Check Current Price & Availability →Affiliate disclosure: This link is an affiliate link. SunPowerLogic may earn a commission from qualifying purchases at no additional cost to you.
Product Overview
EPEVER Tracer3210AN G3 30A MPPT Charge Controller (MT52 Kit) is a charge controller from EPEVER tracked in the SunPowerLogic product catalog. Where specifications are listed, this page summarizes controller current rating of 30 A, controller type of MPPT, supported system voltage of 12 V, maximum pv input voltage of 100 V, additional specification note of Tracer AN G3; 12V/24V auto; 100V max PV open circuit; bundle includes MT52 remote meter, temperature sensor, and USB communication cable; LiFePO4/lead-acid/AGM/gel compatible; max PV 390W @12V / 780W @24V per listing.
Charge controllers regulate solar input to protect batteries and match charging profiles. Current rating, supported system voltage, and maximum PV input voltage are the key compatibility checks when pairing with panels and battery banks.
Additional listing note: Tracer AN G3; 12V/24V auto; 100V max PV open circuit; bundle includes MT52 remote meter, temperature sensor, and USB communication cable; LiFePO4/lead-acid/AGM/gel compatible; max PV 390W @12V / 780W @24V per listing.
SunPowerLogic does not replace professional electrical design. Confirm wiring, fusing, and local code requirements for your build.
Editor’s Verdict
EPEVER Tracer3210AN G3 30A MT52 kit lists 30A charge current, 100V max PV input, and a complete MT52 monitor, sensor, and USB cable bundle per the source listing. It scores 8/10 for small off-grid and RV systems where G3 MPPT efficiency and included monitoring match the workbook listing.
Pros
- 30A MPPT G3 controller with MT52 kit per listing
- 100V max PV supports higher-voltage panel wiring
- LiFePO4 and lead-acid compatibility listed
Cons
- Bundle treated as one controller SKU—accessories not split into separate products
- Manufacturer image shared across G3 series family photo
- 30A still below 40A–60A tiers for high-yield arrays
Specifications
- Controller current rating
- 30 A
- Controller type
- MPPT
- Supported system voltage
- 12 V
- Maximum PV input voltage
- 100 V
- Additional specification note
- Tracer AN G3; 12V/24V auto; 100V max PV open circuit; bundle includes MT52 remote meter, temperature sensor, and USB communication cable; LiFePO4/lead-acid/AGM/gel compatible; max PV 390W @12V / 780W @24V per listing
Best For
Ideal use cases based on product category, published specifications, and setup references in the SunPowerLogic catalog. These are planning contexts—not guarantees of compatibility for every installation.
- RV and marine builds in the 30A MPPT tier
- Small off-grid cabins with MT52 remote monitoring
- Buyers wanting G3 Tracer AN with included display cable and sensor
Not Ideal For
Situations where another product type, capacity tier, or specification may be a better fit.
- Systems needing more than 30A charge current
- Buyers who do not need bundled MT52 accessories
- Large arrays better matched to 40A or 50A EPEVER controllers in this batch
Used in These Setups
No setups yet
Alternatives to Consider
Other catalog products flagged as alternatives during editorial review.
Related Products
Products from the same brand or product type, excluding this listing.
EPEVER MT50 Remote Meter
View Product →EPEVER Tracer1210AN 10A MPPT Charge Controller
View Product →EPEVER Tracer2210AN 20A MPPT Charge Controller (MT50 Kit)
View Product →EPEVER Tracer2210AN G3 20A MPPT Charge Controller
View Product →EPEVER Tracer4210AN G3 40A MPPT Charge Controller (MT52 Kit)
View Product →
EPEVER WiFi Adapter (EPEVER-WiFi-2.4G-RJ45-D)
View Product →Frequently Asked Questions
Is the EPEVER Tracer3210AN G3 30A MPPT Charge Controller (MT52 Kit) suitable for RV use?
RV suitability depends on whether this charge controller matches your voltage architecture, daily energy budget, and charging equipment. Listed controller current rating is 30 A. Compare your load list and recharge plan against the listed specifications rather than the product category alone.
Can it be used off-grid?
Off-grid use is possible when the charge controller is sized for your daily consumption and paired with appropriate charging and protection equipment. Listed controller current rating is 30 A. Whole-property off-grid loads often require system-level planning beyond a single component.
Is it compatible with solar?
Solar compatibility depends on matching panel output, charge equipment limits, and battery chemistry. Listed controller current rating is 30 A. Verify controller current, voltage limits, and connector types before connecting arrays.
Does it require an inverter?
Most charge controller products operate on the DC side of a system. AC appliances typically require a separate inverter sized for peak and surge loads unless another integrated power station handles conversion.
How do I choose the correct size?
Start with daily energy use in watt-hours, identify peak AC demand, and map those figures to the relevant specification for this product type—amp-hours and voltage for batteries, watts for solar and inverters, or controller current for charge equipment. SunPowerLogic setup examples and buying guides show the same planning method using documented assumptions.
What should I verify before buying the EPEVER Charge Controller?
Confirm merchant listing details, warranty terms, connector types, and installation constraints that are not captured in the catalog. Listed controller current rating is 30 A. Affiliate links, when present, lead to external retailers where current availability and pricing should be confirmed directly.
Product specifications on this page come from published listings tracked in the SunPowerLogic catalog. They are planning references, not professional electrical designs. Verify compatibility with your loads and installation before purchasing.