Charge Controller
Victron SmartSolar MPPT 150/70 MC4 VE.Can Charge Controller
Brand:Victron
Check Current Price & Availability →Affiliate disclosure: This link is an affiliate link. SunPowerLogic may earn a commission from qualifying purchases at no additional cost to you.
Product Overview
Victron SmartSolar MPPT 150/70 MC4 VE.Can Charge Controller is a charge controller from Victron tracked in the SunPowerLogic product catalog. Where specifications are listed, this page summarizes controller current rating of 70 A, controller type of MPPT, supported system voltage of 12 V, maximum pv input voltage of 150 V, additional specification note of 12/24/36/48V; 150V max PV input; 70A charge current; MC4 PV terminals; VE.Can; Bluetooth.
Charge controllers regulate solar input to protect batteries and match charging profiles. Current rating, supported system voltage, and maximum PV input voltage are the key compatibility checks when pairing with panels and battery banks.
Additional listing note: 12/24/36/48V; 150V max PV input; 70A charge current; MC4 PV terminals; VE.Can; Bluetooth.
SunPowerLogic does not replace professional electrical design. Confirm wiring, fusing, and local code requirements for your build.
Editor’s Verdict
Victron SmartSolar MPPT 150/70 MC4 VE.Can lists 70A charge current, 150V max PV input, MC4 PV terminals, and 12/24/36/48V support per intake specifications. It scores 8/10 for high-output Victron builds that need factory MC4 connections and VE.Can coordination.
Pros
- 70A charge current—the highest MPPT rating in this intake
- 150V max PV input for high-voltage array planning
- MC4 and VE.Can support listed for integrated Victron systems
Cons
- Most complex wiring and fuse planning in this controller batch
- Requires MC4-compatible array design
- Premium Victron pricing versus mid-tier controllers
Specifications
- Controller current rating
- 70 A
- Controller type
- MPPT
- Supported system voltage
- 12 V
- Maximum PV input voltage
- 150 V
- Additional specification note
- 12/24/36/48V; 150V max PV input; 70A charge current; MC4 PV terminals; VE.Can; Bluetooth
Best For
Ideal use cases based on product category, published specifications, and setup references in the SunPowerLogic catalog. These are planning contexts—not guarantees of compatibility for every installation.
- Large off-grid arrays and high-capacity mobile banks
- Victron GX and VE.Can ecosystem builds
- Installations needing factory MC4 PV connections without crimping
Not Ideal For
Situations where another product type, capacity tier, or specification may be a better fit.
- Small RV arrays where 15A–50A controllers suffice
- Buyers without MC4 array hardware
- Budget-first setups avoiding premium charge hardware
Used in These Setups
No setups yet
Related Products
Products from the same brand or product type, excluding this listing.
Victron BlueSolar MPPT 75/15 Charge Controller
View Product →
Victron BMV-712 Smart Battery Monitor
View Product →
Victron Orion-Tr 12/12 18A DC-DC Converter
View Product →
Victron Orion-Tr Smart 12/12 30A DC-DC Charger
View Product →
Victron SmartShunt 500A Battery Monitor
View Product →
Victron SmartSolar MPPT 100/50 Charge Controller
View Product →Frequently Asked Questions
Is the Victron SmartSolar MPPT 150/70 MC4 VE.Can Charge Controller suitable for RV use?
RV suitability depends on whether this charge controller matches your voltage architecture, daily energy budget, and charging equipment. Listed controller current rating is 70 A. Compare your load list and recharge plan against the listed specifications rather than the product category alone.
Can it be used off-grid?
Off-grid use is possible when the charge controller is sized for your daily consumption and paired with appropriate charging and protection equipment. Listed controller current rating is 70 A. Whole-property off-grid loads often require system-level planning beyond a single component.
Is it compatible with solar?
Solar compatibility depends on matching panel output, charge equipment limits, and battery chemistry. Listed controller current rating is 70 A. Verify controller current, voltage limits, and connector types before connecting arrays.
Does it require an inverter?
Most charge controller products operate on the DC side of a system. AC appliances typically require a separate inverter sized for peak and surge loads unless another integrated power station handles conversion.
How do I choose the correct size?
Start with daily energy use in watt-hours, identify peak AC demand, and map those figures to the relevant specification for this product type—amp-hours and voltage for batteries, watts for solar and inverters, or controller current for charge equipment. SunPowerLogic setup examples and buying guides show the same planning method using documented assumptions.
What should I verify before buying the Victron Charge Controller?
Confirm merchant listing details, warranty terms, connector types, and installation constraints that are not captured in the catalog. Listed controller current rating is 70 A. Affiliate links, when present, lead to external retailers where current availability and pricing should be confirmed directly.
Product specifications on this page come from published listings tracked in the SunPowerLogic catalog. They are planning references, not professional electrical designs. Verify compatibility with your loads and installation before purchasing.